Polyester + PP Waste Treatment Combined FilleR For Sewage Treatment
Product Features
1. It has a plastic ring as the skeleton, loaded with vinylon wire, which is fastened on the plastic ring. In the sewage, the tow is evenly distributed, easy to form and change the membrane, and has good adaptability to the sewage thick liquid.
2. The structure is to change the plastic disc buckle into a double circle big plastic ring, and press the aldehyde fiber or polyester fiber on the ring to make the fiber bundle evenly distributed.
3. The inner ring is a snowflake shaped plastic branch, which can not only hang film, but also effectively cut bubbles, improve the transfer rate and utilization rate of oxygen, make the water gas biofilm have full exchange, and make the organic matter in the water have efficient treatment. The combination packing is the best choice under the condition of strong aeration turbulence.
4. Application of combined packing: it is used in sewage and wastewater treatment engineering, matched with equipment such as contact oxidation tower and oxidation tank of oxidation pool, and is a kind of biological carrier for wastewater treatment by biological contact oxidation and anaerobic fermentation.
5. Performance characteristics of combined packing: it has high heat dissipation performance, small resistance, good water and air distribution performance, easy to generate film, change film, good applicability to sewage concentration, and has the effect of cutting bubbles.
Application
The composite packing is used in sewage and wastewater treatment engineering, matched with contact oxidation tower, oxidation tank and other equipment. It is a kind of biological carrier for the treatment of wastewater by biological contact oxidation and anaerobic fermentation.
It is widely used in printing and dyeing, silk spinning, food, pharmaceutical, petrochemical, papermaking and other wastewater treatment, so it is welcomed by the majority of users.
Installation
There are square, equilateral triangle and other installation methods. The frame has steel structure and soft rope structure, which are made into upper and lower layers respectively. The distance between the two layers is the effective length of the filler. The two ends of each piece of packing
are provided with ropes for binding. During installation, special knotting method is used to fix the packing on the upper and lower frames.
Technology Parameter
| Specifications |
Unit weight(kg/m3) |
Film forming weight(kg/m3) |
Surface area(m2/m3) |
| (diameter x piece distance) |
| Φ150×80 |
2.8 |
80 |
350 |
| Φ150×100 |
2.6 |
75 |
310 |
| Φ180×80 |
2.5 |
75 |
320 |
| Φ180×100 |
2.3 |
72 |
295 |
| Φ200×80 |
2.3 |
75 |
315 |
| Φ200×100 |
2.1 |
72 |
285 |
Product Tags:
|
|
Wastewater Combined Filler Sewage Treatment Polyester PP Material Made Images
|
